SAE 30 running in oil for classic engines.
Highest quality solvent refined mineral base stocks treated with specially designed additive system.
Use as received for initial running in of re-built engines.
Formulated for running in on the road.
Can be used for test bed running.
Run engine at peak torque to ensure maximum bedding-in of piston rings.
Drain and refill with the Millers Classic lubricant most suitable for the engine.
High quality mineral oil formulated to solve the problems experienced when reconditioned engines do not bed-in.
- Provides full protection to highly stressed valve gear and associated components whilst allowing piston rings
- to bed in against the bore.
- Suitable for limited road use [500 miles] after which it should be replaced with the appropriate Millers Classic
- Engine Oil.
- Good running in will optimise the performance and fuel efficiency of a reconditioned engine.
Note: Do not use high performance oils before the bedding-in process is complete.
Designed to provide the performance of API SE/CC.
Suitable for 500 miles road use.
Very low leak down (4%) obtained after thorough running in process.
We have carriage rates to UK mainland from as little as £2.95 (Inc Vat) using our saver rate on orders less than 1kg.
Standard UK mainland carriage is now a great flat rate of £4.99 (Inc Vat) no matter what the weight (excludes some Highland post codes).
We've kept costs as low as we can.
Carriage charges are based on weight - please see our table of carriage costs for full details.
When placing an order with Opie Oils, we'll do all we can to get your order to you as quickly as possible. The vast majority of items are held in stock and dispatched from our UK warehouse. UK delivery will take less than 7 working days (i.e. Monday to Friday inclusive), unless we contact you to advise otherwise. In 90% of cases, delivery is made well before this, and priority ordering is also available (Click here for more details). In case of Bank Holidays please allow an extra working day.
