Search Button


Account Button


Basket Button

Basket Basket

Search Suggestions



View All Results

ACF-50 Anti-Corrosion Formula

ACF-50 Anti-Corrosion Formula


ACF-50 Anti-Corrosion Formula - 1 Quart (each 946ml)

1 Quart (each 946ml)


ACF-50 Anti-Corrosion Formula - 4 Litres

4 Litres


ACF-50 Anti-Corrosion Formula - 20 Litre Container

20 Litre Container


Checking Stock



Add To Basket

ACF-50 Anti-Corrosion Formula

ACF-50 Anti-Corrosion Formula is a state of the art, anti-corrosion / lubricant compound.

ACF-50's active "Thin Fluid Film" compound contains a proprietary package of additives that actively penetrates through the corrosion deposits to the base of the cell where it emulsifies and encapsulates the electrolyte, lifting it away from the metal surface. This isolation process keeps the corrosion cell deactivated. ACF-50's properties mean that just the smallest amount will get into every crevice, every blemish of corrosion, and utterly remove the water. No water means no corrosion, period.

ACF-50 then dispels this moisture and provides an atmospheric barrier which prevents any further moisture contact, thereby keeping the cell inactive. The compound continues to actively penetrate and "creep" into the tightest of seams, lap joints, micro cracks and around rivet heads, dissipating the moisture, even salt water, in these corrosion prone areas. These unique abilities of ACF-50 remain effective for 12 months, gradually disappearing as it is chemically consumed.

It is important to emphasize that ACF-50 is also an excellent lubricant but does NOT contain any wax, resin, silicon or Teflon... compounds that can gum up mechanisms, block drain holes, or trap moisture to cause corrosion.

ACF-50 can be used virtually anywhere that corrosion is a problem. Applications such as interior metal surfaces, structural assemblies, micro switches, avionic components, solenoids/motors, battery terminals etc.


  •     Kills existing corrosion & prevents new
  •     'ACTIVE' for up to 12 months
  •     Excellent lubricant & penetrant
  •     Approved for use on electrics & engines
  •     Easily applied non-drying, ultra thin, clear film
  •     Very economical
  •     Contains no wax, silicon, Teflon or water


  • MIL SPEC 81309 TYPE II AND III APPROVALS which means ACF-50 is approved for ferrous and nonferrous metals, electrical systems and electronic components.
  •     CHEMICALLY NEUTRALISES corrosive environmental effects, including de-ice spray.
  •     EASILY APPLIED non-drying, ultra-thin, clear film.
  •     CONTAINS NO WATER,SILICON,TEFLON OR WAX no sticky build up, no risk of existing corrosion being sealed in and no risk of water remaining where it will cause corrosion and damage, even on electrics.
  •     ‘ACTIVE’ which means that it ‘creeps’ and ‘keeps on working’.
  •     DOESN’T NEED REAPPLYING ACF-50 will last up to 24 months,
  •     ECONOMICAL - 95% Product – a little goes a long way - lasts ages.
  •     SAFE TO USE ANYWHERE ideally misted into voids or applied directly into electrical joints and components where it will prevent corrosion induced failures.
  •     All Year Round SERVICE SPRAY.

Fitment / Compatibility:

ACF-50 is 95% product, hence virtually no propellant. Keep the tin in a warm environment, shake very well before use and remember a little ACF-50 goes a long way, so keep a rag handy to soak up any excess - then use the rag to help spread the product. ACF-50 has strong capillary action so will creep into all the areas that moisture can, 'actively' pushing out moisture and replacing it with protection. Go cautiously when applying to calipers to ENSURE YOU KEEP IT OFF THE BRAKES.

Use ACF-50 anywhere, except the brakes, on your vehicle (hot areas will smoke on first start and burn off). Safe on paintwork, most rubbers and brings up black plastic trim a treat. ACF-50 contains no water and is approved for electrics so spray directly into electrical joints and components where it will prevent corrosion induced failures and high resistance joints. Works well at stopping dirt, mud and salt from sticking. You can come back from a winter drive or ride - a quick wash off and it's gone with the vehicle still protected.

Areas not in direct contact with the elements require treating approx once a year. Other exposed areas re-apply as necessary. You can tell the product is still 'Active; as water will bead on contact...having no water content and not being water soluble ACF-50 only dissipates by being 'sacrificial' whilst stopping existing or new corrosion so just re-treat as required.

PDF Downloads:

Download the Safety PDF

Share this product: