Bilt Hamber Auto-balm Cleaning Kit - Soft
This kit provides all that is needed for an outstanding high-shine finish that imparts unique protection to your vehicle’s paintwork, by virtue of auto-balm’s powerful corrosion inhibitors.
Preparation for this finish is provided by the non-corrosive auto-wash that is free of salt and corrosive surfactants plus with a 1:2000 dilution rate auto-wash is extremely economical is use. Its free-rinsing nature ensures a residue free finish ready for claying.
Auto-clay is an award winning polymer clay formulation designed to pull embedded particulate contamination from your car’s finish. Lightly gliding over a film of lubricating water this is a quick, simple method that provides an ultra smooth surface ready to accept auto-balm.
This kit contains soft auto-clay for good condition paintwork and / or winter use
- Auto-wash - our highly concentrated non-corrosive vehicle shampoo
- Auto-clay soft - our highly acclaimed award-winning clay bar
- Auto-balm - the world's only anti-corrosion high-shine car wax 250ml
- App-pad - wax applicator for fine-film application of auto-balm
- Large plush quality micro-fibre buffing cloth
Benefits:How to use:
Use auto-wash on cool surfaces. This is a low viscosity clear liquid, it is not heavily thickened, take care when opening container. Dilute product as required; 5ml or 1 teaspoon in a clean bucket (based on 10 litre bucket) then add hot fast-running water to generate a thick lather. auto-wash can be used neat as a pre-wash spot cleaner using a clean swab for removal of very stubborn oily films. Rinse surfaces thoroughly after use with plenty of clean warm water dry with chamois leather to finish.
Rinse new clay bars in water. Regular grade clay can be softened in warm water for use in colder weather.
While some users prefer to use the whole bar, it’s satisfactory to cut the bar into four pieces. To use the clay bar spray water liberally with a plant mister, on a small area of your car and rub the bar back and forth with light pressure. auto-clay should glide across your paint - keep the paint surface wetted thoroughly. auto-clay must not be used dry. Listen carefully - at first you will hear the bar as it pulls the particles away from the paint, the noise and friction will disappear quickly.
After a few passes rub your fingers over the area to feel if the surface contamination was removed. Keep rubbing until all contamination is gone. Finally, wipe the clay residue off with a soft terrycloth towel, Just like waxing, work in small areas.
What you should see coming off of the car and depositing itself on the clay bar is a reddish-brown residue, this is what you want to see. As the clay bar becomes soiled, simply fold it over squash it out and keep going. Under no circumstances should the clay bar be used if dropped on the ground, inside or out! The clay bar that comes in this pack is good for about 4 or 5 cleans on the average sized car. Once the paint is clean apply auto-balm immediately. Wet the supplied circular app-pad wax applicator under running cold water. Squeeze the pad out - it should retain a damp feel. Touch the surface of the auto-balm paste so that a very small amount of the material is transferred to the pad. Apply to the vehicle keeping the pad flat - the dampness retained in the pad will lubricate the surface and allow the small amount of paste to spread a long way. You should not see droplets of water as you apply auto-balm - if you do then the pad is too wet. Apply extremely sparingly using the applicator pad in circular motion.
Work on small areas, ONLY 2 - 3 feet square, at a time, do not work is direct sunlight and apply only to cool panels.
After application wait for a few moments before buffing to a high uniform shine. Upon buffing auto-balm is transformed into a durable protective high-gloss film - no dust at all is created.