Technical Information:
STEP 1
Rinse your vehicle to remove any areas of heavy dirt build-up.
STEP 2
Add 60ml to 90ml of product to a foam solution bottle, top this off with water before shaking to mix.
STEP 3
Fix the snow foam bottle to the pressure washer and adjust the spray pattern and water mix valve as required.
PRE-WASH:
Working from the top down and in a side to side motion cover the entire surface of the vehicle. Allow the foam to dwell on the surface for several minutes until it has loosened surface dirt and contaminants then rinse thoroughly with a pressure washer. Now move on to your bucket hand wash.
HAND WASH DIRECTIONS:
STEP 1
Rinse your vehicle to remove any areas of heavy dirt build-up.
STEP 2
Add 60ml t 90ml to a 20LTR bucket, and fill with water to generate suds.
STEP 3
Wash the vehicle from top to bottom with a wash mitt, recharging the wash mitt with new suds regularly.
STEP 4
Rinse away all of the suds and dry with a microfibre towel or chamois.