High power engine oil for petrol and diesel engines
100% Synthetic
If you're looking for a top up or full change for a Ford Focus RS II (2.5. Duratec), this is one of the few engine oils that meets the Ford WSS-M2C 937-A spec required for these vehicles.
Motul 8100 X-Max is also suitable for other cars and is a high performance 100% synthetic engine oil.
Recommended for high output engines requiring a lubricant with high HTHS (> 3.5 mPa.s) viscosity and "Mid SAPS" with reduced content of sulfated ash (= 0.8%), phosphorus (0.07 = x = 0.09%) and sulphur (= 0.3%). Compatible with catalytic converters and Diesel Particulate Filters (DPF). Suitable also for any type of fuels, unleaded or leaded Gasoline, Diesel and LPG.
Specially developed in order to meet the most recent FORD technical requirements when a lubricant satisfying FORD WSS M2C 937 A is required. The FORD “937 A” specification requires an extra high oil film resistance for the lubricant to guarantee the viscosity capability over the whole oil drain interval even in severe and extreme conditions (sustained and sport driving,…).
The FORD WSS M2C 937A standard is required for all FORD Focus RS 2.5L Turbo vehicles from MY2008.
Numerous OEMs such as NISSAN, JAGUAR, LAND-ROVER, etc… recommend to use a lubricant with 0W-40 viscosity grade and API SM for most of their sporty vehicles, for example the Nissan GT-R, Nissan 370Z, Nissan 350Z.
MOTUL 8100 X-max 0W-40 formulation is the perfect balance between fuel economy linked to its viscosity grade and outstanding lubrication (high HTHS > 3.5 mPa.s).
Motul 8100 X-max 0W-40 is also known as, Motul 8100 X 0W40, Motul X-max 0W/40, Motul 8100 X-max 0W 40, Motul engine oil for Ford Focus RS 2
The API SM standard requires outstanding detergent / dispersant power, a better viscosity increase resistance against deposits, and high lubricating properties such as wear protection and high temperature resistance for better controlled oil consumption and perfect engine protection over the oil drain interval.
Associated to the ILSAC GF-4 standard for Fuel Economy oils, MOTUL 8100 X-max 0W-40 provides real fuel saving performances. Its viscosity grade SAE 0W-40 minimises oil hydrodynamic friction, allowing fuel economy especially when oil is cold. Improves oil flow at start up, faster oil pressure build up, faster rev raisings and faster operating temperature reach.
Environment friendly, this type of oil allows fuel consumption reduction and therefore minimises green house gases (CO2) emissions.
We have carriage rates to UK mainland from as little as £2.95 (Inc Vat) using our saver rate on orders less than 1kg.
Standard UK mainland carriage is now a great flat rate of £4.99 (Inc Vat) no matter what the weight (excludes some Highland post codes).
We've kept costs as low as we can.
Carriage charges are based on weight - please see our table of carriage costs for full details.
When placing an order with Opie Oils, we'll do all we can to get your order to you as quickly as possible. The vast majority of items are held in stock and dispatched from our UK warehouse. UK delivery will take less than 7 working days (i.e. Monday to Friday inclusive), unless we contact you to advise otherwise. In 90% of cases, delivery is made well before this, and priority ordering is also available (Click here for more details). In case of Bank Holidays please allow an extra working day.
Technical Datasheet PDF
