Gasoline & Diesel lubricant for Euro IV engines 100% Synthetic Fuel Economy Engine Oil specially designed for last generation cars, powered by turbo Diesel direct injection or gasoline engines, EURO IV emission regulation compliant, requiring an ACEA C1 engine oil, requiring low friction, low HTHS (< 3.5 mPa.s) viscosity oil and "Low SAPS" with reduced content of suphated ash (= 0.5%), phosphorus (= 0.05%) and sulphur (= 0.2%).
Suitable for any type of Diesel or gasoline engines calling for "fuel economy" lubricants : ACEA A1/B1, A5/B5 standards.
These oils may be unsuitable for use in some engines. Refer to the owner manual or handbook if in doubt.
Engines compliant with EURO IV emission regulation are fitted with sensitive exhaust gas after treatment systems :
- Sulphur and Phosphorus inhibit catalytic convertors operation and can damage catalytic components : inefficient exhaust gas treatment.
- Sulphated Ashes clog diesel particulate filters : shorten regenerating cycle, higher fuel consumption and engine power loss.
ACEA developed ACEA C1 standard for lubricants with low friction, low HTHS (< 3.5 mPa.s), reduced Sulphated Ash, Phosphorus and Sulphur content (Low SAPS), suitable for use with exhaust gas after treatment systems.
ACEA C1 lubricants are environment friendly reducing fuel consumption, minimizing green house gases emission and also achieve extended drain intervals managed by vehiclesn computer on board.
RECOMENDATIONS
Drain interval : according to manufacturers’ recommendations and tune to your own use.
Do not mix with lubricants not ACEA C1 compliants.
STANDARDS ACEA A5 / B5 / C1 – Ford WSS M2C 934 A
RECOMMENDATIONS Mazda Diesel engines with Diesel Particulate Filter (DPF)
Engines compliant with EURO IV emission regulation are fitted with sensitive exhaust gas after treatment systems
Technical Datasheet PDFViscosity grade SAE J 300 5W-30
Density at 20°C (68°F) ASTM D1298 0,849
Viscosity at 100°C (212°F) ASTM D445 10.1 mm²/s
Viscosity at 40°C (104°F) ASTM D445 56.7 mm²/s
Viscosity index ASTM D2270 167
Pour point ASTM D97 -39°C / -38°F
Flash point ASTM D92 232°C / 450°F
TBN ASTM D 2896 4.8 mg KOH/g
We have carriage rates to UK mainland from as little as £2.95 (Inc Vat) using our saver rate on orders less than 1kg.
Standard UK mainland carriage is now a great flat rate of £4.99 (Inc Vat) no matter what the weight (excludes some Highland post codes).
We've kept costs as low as we can.
Carriage charges are based on weight - please see our table of carriage costs for full details.
When placing an order with Opie Oils, we'll do all we can to get your order to you as quickly as possible. The vast majority of items are held in stock and dispatched from our UK warehouse. UK delivery will take less than 7 working days (i.e. Monday to Friday inclusive), unless we contact you to advise otherwise. In 90% of cases, delivery is made well before this, and priority ordering is also available (Click here for more details). In case of Bank Holidays please allow an extra working day.
