Side Marker Light: 24v 1.5M Cable Horizontal : LED | HELLA 2PS 008 645-001

Description:
Side Marker Light: 24v 1.5M Cable Horizontal : LED | HELLA 2PS 008 645-001

General Details:

Width [mm]	130
Height [mm]	32
Mounting Type	mounting
Fitting Position	Left
Fitting Position	Right
Supplementary Article/Info 2	with pipe
Supplementary Article/Supplementary Info	with seal
Light Design	LED
Inspection Tag	E1 1395
Inspection Tag	E1 1396
Protection Type (IP Code)	IP6K9K
Rated Voltage [V]	24
Number of LEDs	1
Number of light functions	2
Fastening Type	for horizontal fastening
Bore Ø [mm]	3,3
Bore Distance [mm]	116
Housing Colour	Black
Cable Length [mm]	1500
Inspection Tag	ECE
LED Colour	Yellow
Power Consumption [W]	1,2
Light Function	with reflector
Light Function	with side marker light (LED)
Lens Colour	Yellow
Current Strength [A]	0,05
Registration Type	ADR/ GGVS Checked
Lamp Type	LED
Inspection Tag	CCC
SVHC	7439-92-1; Lead

Addtional Images:

The modular hybrid rear lamp takes over the distributor function for all the lighting functions required according to the German road traffic registration ordinance StVZO. These are strictly separated from other special lighting and auxiliary functions by a dedicated distributor circuit. This provides the advantage of a cost-effective, easy to install lighting system with a modular structure as well as simple subsequent expansion of the standard system with additional EasyConn components and other lighting and special functions. The fail-safe performance level is very high.

An extension for lighting and special functions is only possible using an additional intermediate adapter. As the number of interfaces increases, so does the danger of the entire lighting system failing. If improperly executed, each intervention increases the failure probability of the entire system.

Amber light. Black housing. Side-marker lamp with reflex-reflector, with 1500 mm lead, 24V Regarding single or double function lamps with LEDs without flasher function In connection with these low powers, which are very different from bulb versions, there can be problems during operation on various traction vehicles because further lighting functions are detected by some traction vehicles. This is a vehicle comfort function which is not required by legislation and does not release drivers from their obligation to see for themselves that the lighting equipment is working.

 Here, too, faulty diagnoses can be a result of the lower power levels involved (instrument panel in the driver cab indicates a bulb failure although the function is working). The functional ability of these light failure checks can only be established by the vehicle manufacturer. Operation of the light with alternating current or pulsed direct current is not permitted! The individual light functions may only be operated with a vehicle fuse of max. 3A. In the case of onboard current limitation with the values specified above by the onboard control unit an additional fuse for the lamp is not required.


Full product details available, below.

Fitting Position	Left, Right
Inspection Tag	E1 1395, E1 1396
Width [mm]	130
Height [mm]	32
Light Design	LED
Light Function	with reflector, with side marker light (LED)
Cable Length [mm]	1500
Mounting Type	mounting
Fastening Type	for horizontal fastening
Rated Current [A]	0,05
Rated Voltage [V]	24
Lens Colour	Yellow
Housing Colour	Black
Power Consumption [W]	1,2
LED Colour	Yellow
Number of light functions	2
Number of LEDs	1