Search Button

Search

Account Button

Account

Basket Button

Basket Basket

Search Suggestions

Categories

Products

View All Results

Amsoil Performance Improver Gasoline Additive

Amsoil Performance Improver Gasoline Additive
Loading...

Sizes:

Amsoil Performance Improver Ga - 12oz Bottle

12oz Bottle

£17.95

Checking Stock

or

2
4
6

Add To Basket

Description:
Amsoil Performance Improver Gasoline Additive

Amsoil Performance Improver Gasoline Additive improves fuel economy by reducing fuel injector deposits, intake valve deposits and combustion chamber deposits in 100% of the vehicles tested. It is formulated for both gasoline direct injected (GDI) and port fuel injected engines

Treat one full tank of gas up to 20 gallons with one bottle of P.i. For very large gas tanks, partially fill to 40 gallons and treat with two bottles of P.i. Using more than two bottles per treatment is not recommended. Treat gas every 4,000 miles of service (or 100 hours for marine, stationary and off-road gasoline-powered engines). P.i. helps pass emission tests by running one tank of treated fuel through the engine prior to testing. Safe for use with catalytic converters, oxygen sensors, oxygenated gas and 10 percent ethanol blended gas. Not recommended for two-cycle engines.

Benefits:

Untreated Fuel Leads to Poor Engine Performance
A vehicle demonstrates its best efficiency and engine performance when it is new. As the engine ages, its performance suffers from gasoline-generated deposits that form on the fuel injectors, intake valves and combustion chamber. Additives are required to control deposit formation. Today’s fuels, however, lack sufficient treatments of either enough additives or high-quality additives.
Fuel system deposits result in the following:
  • Lost fuel economy
  • Lost power and poor throttle response
  • Failed emission tests
  • Poor drivability – surging, hesitation, stalling, rough idle
  • Engine knocking (pinging) and rap
  • Difficult starts

Treated Fuel Delivers Maximum Performance
AMSOIL P.i. ranks among the most potent gasoline additives. As a concentrated detergent, it is highly effective in cleaning combustion chamber deposits, intake valve deposits, port fuel injector deposits and gasoline direct injector deposits. AMSOIL P.i. helps maintain peak engine efficiency, fuel economy, power and drivability in newer low-mileage engines. In engines with accumulated deposits, testing shows AMSOIL P.i. provided the following clean-up benefits after only one tank of gasoline:

  • Improved fuel mileage an average of 2.3% and up to 5.7%
  • Reduced emissions  – hydrocarbons (HC) up to 15%  – carbon monoxide (CO) up to 26%  – nitrous oxides (NOx) up to 17%
  • Restored GDI injector flow to 99.1%
  • Restored power and performance
  • Reduced need for costly higher-octane fuel
  • Reduced noise from carbon rap and pre-ignition
  • Better drivability
  • Smoother operation AMSOIL P.i. works as an “emissions passer.” It is ideal for use prior to emissions inspections.

Maximum Deposit Clean-up
Fuel Injector Deposits form after the engine has been shut down and there is no gasoline flowing through the injectors. During this “hot soak” period the injectors heat up and the gasoline remaining in the injectors degrades and forms deposits. Being located in the combustion chamber, GDI injectors are also subjected to intense heat and pressure, making them even more susceptible to deposits. Even small amounts of deposits can cause injectors to malfunction. Fuel flow is reduced and spray patterns are disrupted, decreasing engine efficiency, power and fuel economy, while increasing exhaust emissions.

Maximum Fuel Economy
AMSOIL P.i. maximizes fuel efficiency by dissolving and removing fuel system deposits and other contaminants for improved power and overall performance.


Technical PDF Downloads:

Download the Technical PDFDownload the Safety PDF

If you've got a question about this product ask it here!

Your question and our response may by made public to help others.



Share this product: