Wynns Diesel EGR Cleaner

Provides immediate cleaning of the air intake system, airflow sensor, inlet valves, turbo and EGR system

• Provides immediate cleaning of the air intake system, airflow sensor, inlet valves, turbo and EGR system Dissolves gum, lacquer, tar, carbon and varnish
• Restores perfect airflow towards the combustion chamber
• Eliminates starting problems, providing a regular and stable idle
• Improves acceleration properties

Technical Information:

• With warm engine, open the air filter housing and remove the air filter.
• Let engine run at idle.
• Make sure the extension spray tube is directed into the air intake manifold. Spray with short intervals of maximum 1 second each. After each spraying, wait until the original rpm is regained and the engine runs stable.
• During the spraying, the rpm can go up or down. Diesel knocking can increase. This is due to the change in the air/fuel ratio. Occasionally increase rpm between 1000 and 1500 rpm for several seconds and wait until engine stabilizes before spraying again.
• Do not accelerate when rpm drops!!
• When the rpm doesn’t increase during spraying, stop the treatment and contact your workshop.
• Continue until the 150 ml of product in the aerosol is consumed.
• Let the engine run at idle for 5 minutes.
• Stop the engine. Replace disassembled parts.
• Start engine and drive 5 to 10 km, but do not exceed 3000 rpm.
• Allow engine to idle again for at least one minute before stopping the engine.