Bilt Hamber Electrox (Non-Aerosol)

Bilt Hamber Electrox is a unique zinc-rich coating that protects steel from corrosion by both barrier and electrical functionality. Coating steel with Electrox produces a surface film containing over 90% metallic zinc. Once cured, the tightly packed zinc particles establish an electronically conductive pathway, enabling cathodic protection of the underlying steel; exactly the same principle utilised in hot zinc galvanising.

For years, galvanised steel has proven to provide outstanding longevity even in the most hostile and aggressive environments. It’s unfortunate that the process involves hot dipping steel into a bath of liquid zinc.

For many items and projects this is, of course, simply not possible. For those wanting to provide the very best protection to steel, Bilt-Hamber’s Electrox allows the advantages of a zinc coating to be obtained as simply as if a normal metal primer were being used. It can be applied by brush or by spray, and as it is a single pack product there is no need for mixing activators. The cured zinc film can be left uncoated or top coated with a wide range of finishing paints to further increase protection

Electrox is recommended for use on offshore structures, harbour installations, jetty and pier pilings and extreme duty vehicle chassis work.

Electrox is of particular benefit in vehicle restoration where underbody protection is of vital importance. The highest levels of corrosion protection can easily be imparted to chassis rails, floor pans, sill sections, suspension components etc., in fact any area or part can be protected with this outstanding primer.

Most paint coatings rely on barrier protection of steel surfaces to prevent corrosion, and while most have corrosion inhibitor pigments to improve longevity, the long-term protection is often disappointing. Protection of these barrier type coatings is quickly diminished at impact and damage sites too.

A cured film of Electrox is a true zinc-rich coating containing in excess of 90% pure zinc. Proven through thousands of hours of salt-spray testing, zinc-rich coatings are accepted as irreplaceable in the most hostile corrosive conditions. Furthermore, the protection imparted by cathodic action means that steel surfaces are kept free of corrosion even in the event of film disruption.

Frequently Asked Questions

1. What is the coverage of Electrox?
8-10 square metres per litre.
2. I would like to use Electrox in a spray gun, what size nozzle should I use?
1.6mm-2.0mm.
3. Can Electrox be used over Hydrate-80?
No. This product must contact bare steel and Hydrate-80 cures as a primer, covering the bare steel. Use Epoxy-Mastic over Hydrate-80.
4. Can Electrox from a pail be thinned for use in a handheld spray gun?
Yes, use 10% Xylene to thin the Electrox.
5. Which primer can I use on Galvanized surfaces?
Etchweld is the best product to cover a continuous galvanized area. In situations where a galvanized surface has rusted in patches, remove rust with Deox-Gel and patch just these areas with Electrox.
6. Should I use Electrox on both my steel chassis and aluminium bodywork?
On the steel chassis, Electrox is best. However, it would be better to use Etchweld on the aluminium bodywork.

Benefits: