Mahle Fuel Filter KC38 (Ford)

Increased service life makes also higher demands on the filter media in oil filters, particularly as the new engine generations with direct injection increase the problem of oil aging. With the use of new fully synthetic high performance oils, replacement intervals of up to 50,000 km are reached – with a trend to even longer intervals. However, due to the new general conditions, conventional filter raw materials are becoming less suitable, especially as the excessive nitration of the oils leads to embrittlement of the filter medial. The response from MAHLE: a fully synthetic two-layer fleece made of polyester, consisting of a support and a filtration layer. This makes it possible to achieve highest filtration performance with best stability – and at the same time block forming in the pleats can be avoided. Compared with cellulose fibres, the aging stability of the new oil filter medium is 7 times higher – and it offers the same or even lower pressure drop at significantly increased dirt pick-up capacity.

We also have the following application guides available to help you find the part you need, whether it's for a car, van, truck, agricultural or construction vehicle:

• Mahle filters for passenger cars PDF (8MB)
• Mahle filters for trucks and buses PDF (5.5MB)
• Mahle filters for agricultural & construction PDF (7MB)

General Details:

Additonal Images:

Fitment / Compatibility:

Cross Reference:

Documents/PDFs:

• Service Information
• Service Information
• Service Information