Fuchs Renolin PG 320 High Quality Industrial Gear Oil

Loading...

Sizes:

20L (Drum)

£332.50

Checking Stock

QTY:

or

2

4

6

Add To Basket

Description:
Fuchs Renolin PG 320 High Quality Industrial Gear Oil

Lead Time Warning:

Please note that some industrial and commercial products are made to order and therefore have an extended lead time.
For exact delivery timescales get in touch with the Opie Oils team.

Is this the right product?

Making sure that you use the right oil, lubricant, grease or product for your commercial / industrial application is especially important when dealing with expensive machinery.

If you are unsure if this product is right for your needs or have any other questions please feel free to get in touch or use our Recommendation form:

Industrial Help / Recommendation Form

Fully synthetic EP industrial gear oils based on special, selected polyglycols (PAG)

The RENOLIN PG oils are fully synthetic industrial gear oils based on special, newly developed polyglycol base oils.
Thus the RENOLIN PG products offer a very high oxidation and temperature stability. Polyglycols have a very good viscosity-temperature behaviour (high natural, shear-stable VI) and can therefore be used within a wide temperature range (depending on the viscosity grade and the working conditions from -35C up to 160C). Special additives adapted to these polyglycols further improve the good properties of the base oils - high wear protection, excellent corrosion protection also at the presence of condensation water, low foaming, and very good compatibility with non-ferrous metals.

The excellent anti-wear properties could be proven in different tests with RENOLIN PG. The load stage >14 was passed in the standard FZG test (FZG A/8,3/90), and the load stage >12 was passed in the FZG test A/16,6/140 (high speed, high temperature FZG test). RENOLIN PG has a high micropitting resistance - load stage “high” - and a good pitting resistance. RENOLIN PG was tested in a special “low speed” FZG test (according to DGMK (Deutsche Wissenschaftliche Gesellschaft fur Erdöl, Erdgas und Kohle e.V.) - FZG scuffing test) which RENOLIN PG passed with excellent results (wear category: “low” = excellent). This special test shows the excellent wear protection of RENOLIN PG at two different temperatures (90C and 120C) under mixed and boundary lubrication conditions. The lubricating film remains stable even at high pressures and under mixed friction conditions. Thus the friction coefficient is low, and a temperature reduction by up to 20C can be achieved compared with mineral oil-based lubricants.

Efficiency tests in a worm gear test rig demonstrated the high performance and the low friction coefficient which is especially of great importance for the use in worm gears. The results of RENOLIN PG in the FE8 roller bearing wear test were excellent. Tests in a special test rig at the University of Munich (FZG Institute - Forschungsstelle fur Zahnräder und Getriebebau) led to excellent results regarding antiwear behaviour and efficiency.

Application:
The RENOLIN PG gear oils are mainly suitable for the lubrication of gear units and worm gears / roller bearings and friction bearings which are subject to high mechanical and thermal stress. RENOLIN PG oils offer advantages compared with mineral oil-based gear oils especially in applications with high sliding velocities (e.g. worm gear units). Due to the high oxidation stability, the oil change intervals can be extended and the maintenance costs can be reduced at higher operating temperatures. The use of RENOLIN PG in worm gears (steel-bronze pairing) leads to a significant reduction of friction and wear. The RENOLIN PG products can also be used for paper machines, calendars, conveying machines and milling bearings. Peak temperatures of up to 200C are temporarily tolerable.

Note:
RENOLIN PG is not miscible or compatible with mineral oils, ester oils and polyalphaolefins. When changing between polyglycols from different manufacturers, the compatibility has to be checked. Before changing-over, it is recommended to clean the system and to flush with RENOLIN PG. The compatibility with elastomers, varnishes and coatings should also be checked before changing from mineral oil to polyglycols. The specifications of the roller
bearing and gear manufacturers have to be observed.

Benefits:

Excellent wear protection
High scuffing load carrying capacity
Very high resistance to micropitting
Excellent roller bearing wear protection (FE8)
Increase of efficiency, reduction of temperature - low friction coefficient
Excellent viscosity-temperature behaviour (high VI)
For use at high and low operating temperatures
High ageing stability
Good corrosion protection
Excellent air release
Low foaming

Specifications:

The RENOLIN PG products fulfil and exceed the minimum requirements according to:

DIN 51 517-3 (2004): CLP-PG
ISO 6743-6 and ISO 12925-1: CKC / CKD / CKE / (CKS) / CKT
AGMA 9005/E02: EP

Among others, the RENOLIN PG products are approved by:

A. Flender
Alpha Getriebebau
SEW

Technical Information:

Oil drain / change over procedure >>>

RENOLIN PG		320
Characteristics	Unit		Test Method
ISO VG		320	DIN 51 519
Kinematic viscosity at 40ºC at 100ºC	mm2/s mm2/s	320 54.4	DIN EN ISO 3104
Viscosity index	-	237	DIN ISO 2909
Density at 15ºC	kg/m3	1075	DIN 51 757
Colour	ASTM	0.5	DIN ISO 2049
Flashpoint Cleveland open cup	ºC	240	DIN ISO 2592
Porpoint	ºC	-39	DIN ISO 3016
Neutralisation number	mgKOH/g	0.6	DIN51 558-1
Copper corrosion	Degree of corrosion	1-100 A 24	DIN EN ISO 2160
Steel corrosion	Degree of corrosion	0-A	DIN ISO 7120
Mechanical testing in the FZG gear test rig FZG A/8, 3/90 FZG A/16, 6/140	Failure load stage

Technical PDF Downloads:

If you've got a question about this product ask it here!

Your question and our response may by made public to help others.

Free Shipping Over £50.00!

UK mainland, standard shipping*

No Leak Guarantee

We replace any shipping damages

Price Beater

We never like to be beaten on price

Latest Offers Latest Products Frequently Asked Questions Technical Articles / Myth Busting