Fuchs Renogear PG 220 High Quality Industrial Gear Oil

Loading...

Sizes:

20L (Drum)

£218.50

Checking Stock

QTY:

or

2

4

6

Add To Basket

Description:
Fuchs Renogear PG 220 High Quality Industrial Gear Oil

Lead Time Warning:

Please note that some industrial and commercial products are made to order and therefore have an extended lead time.
For exact delivery timescales get in touch with the Opie Oils team.

Is this the right product?

Making sure that you use the right oil, lubricant, grease or product for your commercial / industrial application is especially important when dealing with expensive machinery.

If you are unsure if this product is right for your needs or have any other questions please feel free to get in touch or use our Recommendation form:

Industrial Help / Recommendation Form

A range of polyalkylene synthetic gear oils

The RENOGEAR PG RANGE of industrial gear oils are synthetic products formulated with a polyalkylene glycol base and offer excellent corrosion protection. Outstanding load carrying capacity, thermal stability and demulsification are also provided by the products in the range.

Application:
The RENOGEAR PG RANGE can be used successfully to lubricate items such as calenders, bevel, spiral bevel, helical, spur and worm reduction gearboxes.
Use as a ‘Sealed for life’ grade is possible in certain applications.
RENOGEAR PG oils are not compatible with mineral oils, esters and polyalphaolefins. Do not mix RENOGEAR PG products with this type of fluids. Also when changing from other polyglycol products to RENOGEAR PG, and when mixing different viscosity grades, please check the compatibility.

NOTE: FLUSHING PROCEDURE:
RENOGEAR PG RANGE products are NOT miscible with mineral oil or other glycol based lubricants. When changing from other products the unit should be run to warm the existing fluid, then drained and cleaned of any sludges. Flush with a minimum volume of.
RENOGEAR PG under no load until fluid is warm, then drain, repeat if necessary. Check condition and type of seals and replace if necessary. Fill the gear unit with appropriate RENOGEAR PG fluid and inspect after one or two days to ensure that the lubricant is free from contaminants since contamination with other lubricants can lead to sludge formation, foaming and other general performance reducing problems.

NOTE: MATERIAL COMPATIBILITY:
Seal types of NBR (nitrile rubber), fluoro-silicone or vinyl-methyl polysiloxane (Q) are recommended especially in high temperature applications.
RENOGEAR PG lubricants should not be used with polyurethane based elastomers, leather, cork, asbestos, paper or board.
Ordinary paints will soften in the presence of RENOGEAR PG oils and as such internal surfaces of gear units should not be painted. If painted then a two-pack epoxy type product should be used.

Benefits:

The RENOGEAR PG RANGE of gear lubricants are eminently suitable for applications up to 200ºC
The thermal stability of the products when used in industrial enclosed gear units offers life exceeding 10,000 hours at 100ºC

Specifications:

Meets the requirements of David Brown Type G lubricant.

Technical Information:

RENOGEAR		PG 220
Characteristics	Unit		Test Method
Appearance		Clear fluid
Colour		2 Gardner
Specific gravity at 15.6ºC		1.010	IP160
Kinematic viscosity at 40ºC at 100ºC	mm2/s mm2/s	237 31.8	IP71
Viscosity index		177	IP226
Flash point (PMCC)	ºC	231	IP34
Pour point	ºC	-30	IP15
Neutralisation number	mg KOH/g	1.09	IP139
Air release at 90ºC	min	17	ASTM 3427
Oxidation characteristics Total oxidation products (TOP) with soluble metal catalyst	%wt	0.554	IP280 (BS 2000 part 280)
FZG	load stage	>13	IP334
Timken OK load

Technical PDF Downloads:

If you've got a question about this product ask it here!

Your question and our response may by made public to help others.

Free Shipping Over £50.00!

UK mainland, standard shipping*

No Leak Guarantee

We replace any shipping damages

Price Beater

We never like to be beaten on price

Latest Offers Latest Products Frequently Asked Questions Technical Articles / Myth Busting