Fuchs Renolin AC100 Compressor Oil

Loading...

Sizes:

20 Litres

£88.99

Checking Stock

QTY:

or

2

4

6

Add To Basket

Description:
Fuchs Renolin AC100 Compressor Oil

RENOLIN AC COMPRESSOR OILS has been developed to embrace a wide range of equipment maker's specifications and requirements. The products have been subjected to ongoing development over many years and represent a modern approach to compressor lubrication. The range is based on selected low volatility mineral oil fractions to give freedom from deposits caused by oil carry over. Inhibitors are incorporated to control foaming, oxidation and to minimise mechanical wear.

Application:
RENOLIN AC100 is intended primarily for the lubrication of reciprocating compressors according to manufacturer’s recommendations. May be used for the drip feed lubrication of gears and drive mechanisms in certain screw compressors where oils of this viscosity are stipulated by the machine manufacturers. RENOLIN AC100 may also be used in certain sliding vane type compressors where oils of this viscosity are recommended by the equipment makers. Provide minimum drain intervals of 2000hrs in screw and 1000hrs in van use.

Can be used in most vacuum pump applications where the viscosity is appropriate.

Benefits:

Low volatility
Good separator/reclaimer life in vane and screw machines
Low oil consumption and carry over
Excellent oxidation stability
Effective corrosion protection

Specifications:

Exceeds the requirements of DIN 51506 VD-L test sequence.

Technical Information:

RENOLIN		AC100
Characteristics	Unit		Test Method
Appearance		Clear amber fluid
Specific gravity at 15.6ºC		0.885	IP160
Kinematic viscosity at 40ºC at 100ºC	mm2/s mm2/s	100.0 11.6	IP71
Viscosity index		90 min.	IP226
Flash point (PMCC)	ºC	200 min.	IP34
Pour point	ºC	-18	IP15