Search Button

Search

Account Button

Account

Basket Button

Basket Basket

Search Suggestions

Categories

Products

View All Results

Bilt Hamber Highbild, Surface Imperfection Filler Primer Aerosol

Bilt Hamber Highbild, Surface Imperfection Filler Primer Aerosol
Loading...

Sizes:

Bilt Hamber Highbild, Surface - 500ml Aerosol

500ml Aerosol

£17.95

Checking Stock

or

2
4
6

Add To Basket

Description:
Bilt Hamber Highbild, Surface Imperfection Filler Primer Aerosol

Bilt Hamber highbild is an excellent high solids modified alkyd / zinc phosphate high build filler primer designed to fill and level imperfections in automotive bodywork.

Aerosol with adjustable fan pattern spray valve.

Extensive testing against current filler primers proves Bilt Bamber's highbild offers superior build rate and flatting characterestics. The auto-cross linking film avoids shrink back on repaired areas.

The fast drying film is easily flatted back to achieve and even film and good flow out of subsequent finish coats. highbild is designed to be over coated with a wide-range of single and two pack finishes.

highbild can be used on bare metal, GRP and fully cured paint surfaces. Dry film thickness typically 25 – 50 micron. Normal cure time is 60 minutes before flatting and 90 muniutes before over coating. Accelerated cure can be provided by infra red lamp. highbild provdes true spray gun levels of filler primer build from an aerosol package.

Please note that we cannot ship ANY aerosols to international destinations.


Got bare metal that you're about to paint? make sure it's grease and contaminant free with Bilt Hamber's Xylene Powerful paint thinner solvent

Specifications:

  • High build
  • Easy sanding filler primer
  • Quick cure and acclerated cure
  • Thixotropic formulation clings with anti sag to vertical surfaces

Technical Information:

How To Use:

Always carry out small-scale trial on existing paint coatings, filler and proposed topcoat systems.

Bare steel should be thoroughly degreased with solvent degrease before proceeding. Any existing coating should be flatted using 280 to 400 grit wet or dry paper, then degrease using panel wipe solvent.

Apply even coats at a distance of approximately 25cm. Drying time is dependent on ambient temperature, air movement and film thickness. Guide times; touch dry 30 minutes, firm dry 60 minutes and over coat in 90 minutes.

Flattable normally after 1 hour drying at 200C can be forced dry using medium to long wave infra-red devices. Flatting should carried out using dry 400 – 600 grade paper or wet with 600 – 800 grade.

Technical PDF Downloads:

Download the Technical PDF

If you've got a question about this product ask it here!

Your question and our response may by made public to help others.



Share this product: