Search Button


Account Button


Basket Button

Basket Basket

Search Suggestions



View All Results

HeatShield Armour - Exhaust Insulation Material 6" x 5ft

HeatShield Armour - Exhaust Insulation Material 6" x 5ft


HeatShield Armour 1/4



Checking Stock

This product is currently unavailable for purchase

HeatShield Armour - Exhaust Insulation Material 6" x 5ft

Looking for something easier to install on your pipes than exhaust wrap? This HeatShield Armour does the job and can reduce radiant heat from your exhaust pipes and components by up to 70%!

The outer armour of this heat shield is resistant to the elements, giving it a long life. It features an exclusive BioCool* insulation material as the inner pad, bonded to a heavy-duty foil outer layer using a proprietary process. This makes the heat shield capable of withstanding temperatures of up to 982°C continuously, allowing it to be placed directly on exhaust systems, turbo manifolds, downpipes and diesel particulate filters (check with government regulations regarding usage on DPF).

By directly installing this shield on your exhaust system components, it allows for better performance than the clamp-on standoff heat shields which allow heat to escape as they are set above the pipe rather than directly insulating it.

As there is no metal-to-metal contact layer in this heat shield, it uses a thermal break to create a real cold side (in contrast to an all-metal exhaust heat shield conduction with one hot side and one cold side), giving it a far superior performance advantage. The material is also flexible, easy to cut (you can use a pair of heavy-duty scissors) and may be cleaned after installation.

*BioCool is a non-caustic, non-flammable, bio-soluble silica thermal insulation material. It does not cause itching and won’t smoke or smell the first time it is heat-cycled.

Always wear safety glasses, a dust mask and gloves when handling this product.

HeatShield Armour is available in two thicknesses: 1/4" (0.64cm) for most naturally aspirated applications and 1/2" (1.3cm) for forced-induction and racing applications.

Made in the USA from premium materials, HeatShield stand by their temperature ratings and offer you genuine products that are #racetested.


  • Rated for 982°continuous use, 1204°C intermittent
  • Reduces radiant heat by 70%
  • Can be cleaned after installation
  • Simple installation, install in minutes!
  • The ideal heat shield insulation for your downpipe, DPF, or high-performance application
  • Hard wearing
  • Made in the USA

Technical Information:

  • Length: 5ft
  • Width: 6"
  • Thickness: 1/4"
  • Rated for continuous use at: 982°C
  • Rated for intermittent use at: 1204°C

Share this product: