Please note that some industrial and commercial products are made to order and therefore have an extended lead time. For exact delivery timescales get in touch with the Opie Oils team.
Is this the right product?
Making sure that you use the right oil, lubricant, grease or product for your commercial / industrial application is especially important when dealing with expensive machinery.
If you are unsure if this product is right for your needs or have any other questions please feel free to get in touch or use our Recommendation form:
The RENOLIN UNISYN XT Range – the latest generation of fully synthetic, polyalphaolefin-based industrial gear oils, very high viscosity index. Low-temperature gear oils.
The Renolin Unisyn XT range is based on new, innovative polyalphaolefins and synthetic hydrocarbons. The viscosity index is extremely high: VI > 180. Furthermore, the cold flow properties are outstanding, and pour point values and low-temperature viscosities are extremely low.
This series displays excellent protection against micropitting, excellent FE8 performance and meets and exceeds the requirements on industrial gear oils CLP-HC acc. to DIN 51517-3, ISO 6743-6, ISO 12925-1: CKC, CKD, CKE and AGMA 9005/E02: EP.
Main Application Area:
The oils of the RENOLIN UNISYN XT series are used for all applications in industry where a synthetic oil of the CLP type according to DIN 51517-3 is recommended by the manufacturer. Highly-stressed bearings, joints, pressure screws, spur gears, worm gears and planetary gears can be reliably, safely and economically supplied even at short-term peak temperatures up to 150 °C. RENOLIN UNISYN XT can particularly be used if high low temperature demands for the gear oil are required.
Please note: This product replaces Fuchs Renolin Unisyn CLP 220.
Benefits:
Fully synthetic
Very high, natural, shear stable viscosity index
High micropitting resistance
Approved by leading gearbox manufacturers
Based on PAO (Polyalphaolefins)
Excellent low temperature behaviour
Low foaming
Good air release capacity
Very good aging resistance
Excellent corrosion protection
Excellent viscosity-temperature behaviour
Very high natural VI (viscosity index)
Multigrade character
Excellent wear protection, high EP performance
Miscible with mineral oil- and ester-based gear oils
Prolongation of the service intervals possible
For high and low operating temperatures
Specifications:
Suitable for the lubrication of gears and bearings
For the use in applications with high requirements on wide temperature range. Extreme low viscosity at low temperatures
ISO VG 220 and 320 for wind turbine applications
Approved by leading gearbox manufacturers
Based on PAO (Polyalphaolefins)
The products meet and in many cases exceed the requirements according to:
- DIN 51517-3: CLP
- ISO 6743-6 and ISO 12925-1:
CKC / CKD / CKE / CKSMP
- AGMA 9005/E02: EP
- AIST 224
- Flender approval according to Flender BA 7300,
Table A
Suitable for the following industries;
Mining, quarrying, exploration
Agriculture, forestry
Power generation
Construction
Transport
Machinery, equipment
Cement, lime, gypsum
Forging
Casting
Metal processing
Steel, metals
Other industries
Technical Information:
Density at 15 °C
860 kg/m³
Flash point cleveland
242 °C
Kinematic viscosity at 40 °C
220 mm²/s
Kinematic viscosity at 100 °C
29.4 mm²/s
VI
174
Pourpoint
-42 °C
Technical PDF Downloads:
If you've got a question about this product ask it here!
Your question and our response may by made public to help others.